![background image](http://html1.mh-extra.com/html/subaru/h7110fs400/h7110fs400_installation-instructions-manual_1389251001.webp)
1
INSTALLATION
INSTRUCTIONS
SECURITY SYSTEM
UPGRADE
FORESTER
P/N: H7110FS400
Kit Contents:
1
Security Control Module w/Integral Bracket
1
Starter Interrupt Relay w/Integral Bracket
1
Extension Harness 1m (3 ft.)
1
M6 Nut
1
Wire tie
2
Window Decals
1
Installation Manual
Tools Required:
#1 Flat-tip Screwdriver
#2 Phillips Head Screwdriver (short)
Electrical Tape
1/4” Drive Ratchet
10-inch 1/4” Drive Extension
12mm Socket
10mm Socket
This device complies with FCC rules part 15. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must
accept any interference that may cause undesired operation.
NOTE: This system requires prior installation of Keyless Entry
System. If installing both systems at the same time, install the
Keyless Entry System first.
99.11
UT27S-11
Printed in Japan