background image

Important Warning Statements

 WARNING: This product is intended for use in ordinary indoor 

locations of family living units, not for use in boats or 

recreational vehicles. It is not designed to measure compliance 

with commercial or industrial standards. It is not suitable for 

installation in hazardous locations as defined in your local 

building code.
The installation of this device should not be used as a substitute 

for proper installation, use and maintenance of fuel burning 

appliances, including appropriate ventilation and exhaust 

systems. It does not prevent CO from occurring, nor can it solve 

an existing CO problem.

 WARNING: This device is designed to protect individuals from 

acute effects of carbon monoxide exposure. It may not fully 

safeguard individuals with specific medical conditions. If in doubt, 

consult a medical practitioner.
Individuals with medical problems may consider using warning 

devices which provide audible and visual signals for carbon 

monoxide concentrations under 30 PPM.
This carbon monoxide alarm requires a continuous supply of 

electrical power – it will not work without power. Models 

without battery backup will not operate during power failure. 
This alarm has not been investigated for carbon monoxide 

detection below 70 PPM.

Contents of This User Guide

1. 

Information About Carbon Monoxide

2. 

Product Features and Specifications 

3. 

Installation Locations

4. 

Installation Instructions 

5. 

Alarm Characteristics

6. 

Operating Characteristics

7. 

Maintenance 

8. 

Limited Warranty

Summary of Contents for 900-0280CA

















Reviews: