6
3. Other Alarm Visual And Audible Indicators
Operational Mode
Visual Indications
Audible Indications
Action/Note
Normal (standby)
AC power:
Green LED on
continuously.
DC power:
Green LED blink
approx every 60 sec.
Test (button press when
no alarm
condition is present)
(Note: Test is very loud,
stand a few feet away.)
Red LED blinks in time with
alarm pattern.
•
Single beep.
•
3 long beeps, voice "Fire!", 3
long beeps, 4 quick beeps,
Voice "Warning, Carbon
Monoxide," 4 quick beeps.
Perform Test/Hush® button
press once a week to verify
proper alarm operation.
Smoke or CO alarm Memory
(unit has experienced a
smoke or CO alarm event, or
has detected 100ppm CO or
greater.)
Red LED blink every 16 sec.
After button push, voice
“Smoke
previously detected" or
"Carbon Monoxide previously
detected" .
NOTE:
On DC power, alarm
memory is only retained
for 24 hrs.
Push test button to clear
Alarm Memory.
Smoke alarm Hush® Mode
(SMaRT Hush®
CONTROL)
Red LED blinks every 2 sec.
After button push, voice “Hush
Mode Activated." Smoke alarm
pattern stops. (If there is too
much smoke to allow Hush® :
voice "Too Much Smoke, Can-
not be Hushed”, Smoke alarm
pattern continues.)
This feature is to be used
only when a known alarm
condition, such as smoke
from cooking, activates
the alarm.
CO alarm reset
None
After button push: CO alarm
pattern stops.
Unit is confirming if CO is
present or if it experienced a
nuisance situation. Re-alarm
means danger. Move to fresh
air and call 911.
initiating alarm
(multiple alarms in an inter-
connected system)
Red LED blinks in time with
alarm pattern indicating that
this is the unit initiating the
alarm in an interconnected,
multiple alarm, system.
NOTE: It is possible for more
than one unit to detect
a hazard and become an
initiating alarm unit (Red
LED blinking).
Unit in either Smoke or CO
alarm mode.
If you require further information please contact Product Support at 1-800-880-6788 or write us at:
Kidde, 1016 Corporate Park Drive, Mebane, NC 27302. Our internet address is www.kidde.com.
