background image

Battery Replacement and Disposal

The Kids Trax Toys 6V battery will eventually lose the ability to hold a charge. 
Depending on the amount of use, and varying conditions, the battery should 
operate for one to three years. Follow these steps to replace and dispose the 
battery:

1.

  Remove the Motorcycle 

seat, 

as described on page 12.

2.

  Disconnect the 

red battery connectors.

3.

  Remove the scew on the 

battery bracket

 and remove the bracket. 

4.

  Carefully lift the 

battery 

out of the 

battery compartment.

•  Depending on the condition of the battery (i.e.: leakage) you may 

want to wear protective gloves before removal.

•  Do not lift the battery by its connectors or cables

5.

  Place the dead battery in a plastic bag.

Important! 

Recycle the dead battery responsibly. The battery contains 

lead acid (electrolyte) and must be disposed of properly and legally. It 

is illegal in most areas to incinerate lead acid batteries or dispose of 

them in landfills. Take it to a federal or state-approved lead acid battery 

recycler, such as a Kid Trax Toys authorized service center or your local 

automotive battery retailer. Do not throw the battery away with your 

regular household trash!

6.

  Replace the battery 

with a 

Kid Trax  

Toys 6V battery. 
Replacement batteries 
are available  
through Kid Trax 
customer service 
center.

7.

  Reconnect the  

battery connectors.

8.

  Place the 

battery 

bracket 

over the 

battery and fasten  
with the screw you 
removed in 

step 3.

9.

  Replace the 

seat  

and lock it into place.

2

15

1

3

4

Summary of Contents for KT1058WM

























Reviews: