background image

26

ZX AMPLIFIERS

ELECTRONICS LIMITED WARRANTY

KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of 
THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer 
it is warranted for TWO (2) YEARS from date of original purchase with receipt. In all cases you must have the original 
receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction 
during the warranty period, KICKER will repair or replace (at its discretion) the defective merchandise with equivalent 
merchandise at no charge. Warranty replacements may have cosmetic scratches and blemishes. Discontinued products 
may be replaced with more current equivalent products. This warranty is valid only for the original purchaser and is not 
extended to owners of the product subsequent to the original purchaser. Any applicable implied warranties are limited in 
duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail, 
and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations 
on implied warranties; therefore, these exclusions may not apply to you. This warranty gives you specifi c legal rights; 
however you may have other rights that vary from state to state.

WHAT TO DO IF YOU NEED WARRANTY OR SERVICE:

Defective merchandise should be returned to your local Authorized Stillwater Designs (KICKER) Dealer for warranty 
service. Assistance in locating an Authorized Dealer can be found at www.kicker.com or by contacting Stillwater Designs 
directly. You can confi rm that a dealer is authorized by asking to see a current authorized dealer window decal.

If it becomes necessary for you to return defective merchandise directly to Stillwater Designs (KICKER), call the KICKER 
Customer Service Department at (405) 624-8510 for a Return Merchandise Authorization (RMA) number. Package only 
the defective items in a package that will prevent shipping damage, and return to:

 

Stillwater Designs, 3100 North Husband St, Stillwater, OK 74075

The RMA number must be clearly marked on the outside of the package. Please return only defective components. The 
return of functioning items increases your return freight charges. Non-defective items will be returned freightcollect to you. 
For example, if a subwoofer is defective, only return the defective subwoofer, not the entire enclosure. Include a copy 
of the original receipt with the purchase date clearly visible, and a “proof-of-purchase” statement listing the Customer’s 
name, Dealer’s name and invoice number, and product purchased. Warranty expiration on items without proof-of-
purchase will be determined from the type of sale and manufacturing date code. Freight must be prepaid; items sent 
freight-collect, or COD, will be refused.

WHAT IS NOT COVERED?

This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover:
o Damage due to improper installation
o Subsequent damage to other components
o Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation
o Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be
   considered abuse
o Any cost or expense related to the removal or reinstallation of product
o Speakers damaged due to amplifi er clipping or distortion
o Items previously repaired or modifi ed by any unauthorized repair facility
o Return shipping on non-defective items
o Products with tampered or missing barcode labels
o Products returned without a Return Merchandise Authorization (RMA) number
o Freight Damage
o The cost of shipping product to KICKER
o Service performed by anyone other than KICKER

HOW LONG WILL IT TAKE?

KICKER strives to maintain a goal of one week service for all electronics (amplifi ers, crossovers, equalizers, etc.) returns. 
Delays may be incurred if lack of replacement inventory or parts is encountered. Failure to follow these steps may void 
your warranty. Any questions can be directed to the KICKER Customer Service Department at (405) 624-8510. Contact 
your International KICKER dealer or distributor concerning specifi c procedures for your country’s warranty policies.

P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510

Note:

 All specifi cations and performance fi gures are subject to change. Please visit 

www.kicker.com

 for the most 

current information.

stillwater

designs

11ZX.1HI-A-20101004 

2011 ZX 1000.1 1500.1 2500.1 RevA.indd   26

2011 ZX 1000.1 1500.1 2500.1 RevA.indd   26

10/4/2010   4:26:07 PM

10/4/2010   4:26:07 PM

Summary of Contents for ZX1000.1





























Reviews: