4
13. Slide the console back approximately three inches to allow access to the screws securing the bottom of
the left and right vent assemblies and remove the screws. Fig. 7
14. Remove the two screws in the top of the instrument cluster bezel. Fig. 8
15. Pull the bezel loose, but do not completely remove. The bezel just needs to be loose enough to allow
the left vent assembly to be removed.
16. Pull loose the left vent assembly and remove. Fig. 9
17. Open the glove compartment and squeeze the sides inward to allow it to fold all the way down.
18. Find the three bolts securing the passenger side airbag assembly and remove them. Fig. 10
19. Pull the air bag assembly out approximately three inches to gain access to the screw securing the top of
the right vent assembly and remove the screw. Place a towel under the airbag assembly to prevent it from
scratching the dash. Fig. 11
Do Not Disconnect Any Airbag Wiring.
20. Pull the right vent assembly loose and disconnect wiring.
21. Pull loose the small trim panel below the radio. Fig. 12
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
