KickAss KAF-30DS, Manual

Page: 8 / 13

OFFSET
After a few hours of refrigeration system operation, insert a digital thermometer (not included)
inside the compartment in the position where you wish to have a more precise temperature and
check that the temperature indicated on the display coincides with the temperature read on the
digital thermometer. If it does not coincide, change the Offset related to the temperature you wish
to reach inside the compartment until the temperature read on the display coincides with the
temperature indicated on the digital thermometer.
Offset Temperature Interval
1 T ≥ -6°C
2 -12°C ≤ T ≤ -7°C
3 T ≤ -13°C
Data which is used to align the temperature shown on the display with the actual internal
temperature. Adjustment for each offset can vary from -8 / +8.
POWER OPTIONS
LOW VOLTAGE PROTECTION
In order to prevent excessive battery depletion, a protection device shuts off the compressor in
case of insufficient voltage and turns it back on when the voltage in the system increases after the
batteries have been charged.
Battery Protection
Battery level
Digital
Display
12 Vdc 24 Vdc
Cut-Out
Comp. off
Cut-In
Comp. on
Cut-Out
Comp. off
Cut-In
Comp. on
Low
9.6 10.6 21.3 22.7
Medium
11.1 12.1 22.3 23.7
High
11.8 12.8
24.3 25.7
7