background image

The fuse blows.

The wrong fuse is being 
used. Defective electronic 
control unit.

Check the fuse: see table in section 
4.4. Replace the electronic control unit.

The compressor is 
operating intermittently.

Battery low or electrical 
cables in poor condition.

Check wiring conditions, examining for 
loose connections, rust or corosion. If 
wiring needs to be replaced, see the 
manual for correct sizing. If wiring is in 
good condition, check battery function 
and replace if in poor condition.

The compressor never 
stops (correct fridge 
performance)

Incorrect thermostat 
connection on the electronic 
control unit. Thermostat 
broken. Condensation 
is not working properly, 
evaporator cools but not 
enough to cause the 
thermostat to stop the 
compressor.

Rotate the thermostat to off position. If 
the refrigerator continues to function, 
then there is continuity on the control 
unit. Correct the problem on thermostat 
connections (make sure the bridge 
is present on C and P and not on C 
and T on the electronic control unit). 
Rotate the thermostat to off position. 
If the compressor switches off but it is 
impossible to regulate temperature, 
replace the thermostat or recharge the 
cooling system.

The compressor never 
stops (poor fridge 
performance)

Environment very hot + 
insufficient ventilation or 
little gas in the refrigerant 
circuit.

Check ventilation. The compressor 
must be installed in a well-ventilated 
location. If possible, remove the 
refrigerator from the installation hole. 
If the refrigerator operates better, 
improve ventilation, consulting the 
manual for correct installation. If 
ventilation is instead optimal, check 
for the presence of gas in the system, 
contacting a specialised technician.

9

Summary of Contents for KAF-30DS














Reviews: