8
5.2 Standard Operation
To connect the charger to the battery and begin the charging process, please ensure the
following procedure is followed.
BATTERY
Ensure that the 240V AC Mains is disconnected.
STEP
1
When connecting using the alligator clamps, ensure it is connected via the anderson
connector to the charger. Then Connect the POSTIVE + (Red) clamp of the charger to
the PO terminal on the battery post and the NEGATIVE - (black) clamp of the
charger to the NEGATIVE - terminal on the battery post.
STEP
2A
BATTERY
When connecting directly by the anderson connector, plug it into the mating anderson
connector charge port of a battery box or other device with anderson charging input
ensuring correct polarity.
STEP
2B
BATTERY BOX
