6
7. MAKE THE ELECTRIC CONNECTIONS
WARNING:
To avoid possible electrical shock,
be sure you have turned off the power at the
main circuit panel before wiring.
WARNING:
If your house wires are different
colors than referenced in this manual, stop
immediately. A professional electrician is
recommended to determine proper wiring.
Step1.
Connect the fan supply BLACK wire
and fan light supply BLUE wire to the BLACK
household supply wire as shown in Fig. 12.
Follow the steps below to connect the fan to
your household wiring. Use the wire
connecting nuts supplied with your fan. Secure
the connector with electrical tape. Make sure
there are no loose wire stands or connections.
Fig. 12
Fig. 13
Fig. 14
B
LA
C
K
W
H
IT
E
G
R
E
E
N
Ground to
Mounting
Bracket
Green
Ground
Lead
Outlet Box
Ground
Conductor
W
H
IT
E
B
LU
E
B
LA
C
K
SUPPLY CIRCUIT
Mounting Bracket
Shoulder Screw
Canopy
Shoulder Screw
Step 1.
Remove one of the two shoulder screws
in the mounting bracket. Loosen the second
shoulder screw without fully removing it.
(Fig. 13)
Step 2.
Assemble canopy by rotating key slot in
canopy over shoulder screw in mounting bracket.
Tighten shoulder screw. Fully assemble and
tighten second shoulder screw that was
previously removed. (Fig. 14)
8 . FINISHING THE INSTALLATION
Step 4
. After making all of the above
connecting, spread them apart so the GREEN
and WHITE wires to one side of the outlet box
and the BLACK wire toward the other side.
Step 3.
Connect GROUND (GREEN) wires
from mounting bracket and downrod ball, to
GROUND (GREEN) or BARE (COPPER) from
house. (Fig. 12)
Step 2.
Connect the fan neutral WHITE wire to
the household neutral WHITE wire as shown in
Fig. 12.
65"Maor
