CARE AND MAINTENANCE
REV 9-JUN-2022
TROUBLESHOOTING
Fixture does not light. 1. Fixture may be wired incorrectly.
1. Check wiring.
2. Worn or broken bulb.
2. Replace bulb.
1. Check wiring.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Distributed by:
Kichler Lighting LLC
30455 Solon Rd
Solon, OH 44139
Printed in China
13
5c.
If fixture was installed using “PLUG-IN
MOUNTING” assembly instructions, insert
plug into 120-volt electrical outlet.
Turn the on/off switch (G) clockwise to
switch light on/off.
5c
• Always be certain that electric current is turned off before cleaning this item.
• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on
fixture, as it will damage the metal finish.
• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not
wash shades in an automatic dishwasher.
14
ASSEMBLY INSTRUCTIONS (FINAL INSTALLATION STEPS)
NOTE: COMPLETE EITHER “PLUG-IN MOUNTING” OR “DIRECT WIRE MOUNTING” ASSEMBLY
INSTRUCTIONS BEFORE FOLLOWING THESE FINAL INSTALLATION STEPS.
G
4c. Insert 60-watt max. E12 candelabra-base
bulb or LED equivalent (not included) into
socket (C).
4c
C
