11
12
ASSEMBLY INSTRUCTIONS (FINAL INSTALLATION STEPS)
NOTE: COMPLETE EITHER “PLUG-IN MOUNTING” OR “DIRECT WIRE MOUNTING” ASSEMBLY
INSTRUCTIONS BEFORE FOLLOWING THESE FINAL INSTALLATION STEPS.
1c. Carefully slip shade (D) up over socket
cup (K), aligning holes in shade (D) with
holes in socket cup (K). While holding
shade (D) in place, screw three (3) small
thumbscrews (H) into aligned holes and
carefully tighten to secure shade (D) to
socket cup (K).
1c
13
2c. Adjust shade (D) by loosening
shade adjustment thumbscrew
(I) and arm adjustment
thumbscrews (J) at fixture joints
(finger turn slightly
counterclockwise), adjusting to
desired position, and then
re-tightening shade adjustment
thumbscrew (I) and arm
adjustment thumbscrews (J) at
fixture joints (finger turn slightly
clockwise). WARNING: DO NOT
COMPLETELY REMOVE
THUMBSCREWS FROM
FIXTURE JOINTS.
2c
K
H
D
I
J
J
D
