12
FINISHING THE INSTALLATION
Step 3.
Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig. 19)
Canopy
Canopy Hole Cover
NOTE:
Before continuing installation, confirm that the power is still turned off at
the main circuit breaker or by removing the correct fuse. Turning the power off
using a wall switch is not sufficient to prevent electrical stock.
Step 1.
Assemble canopy by rotating key slot in canopy over shoulder screw
in mounting bracket. (Fig. 17)
Canopy
Canopy
Screw
Step 2.
Reinstall the shoulder screw that was previously removed on Page 8
step 2, then retighten two shoulder screws securely.(Fig.18)
Fig. 17
Fig. 18
Fig. 19
