OPERATING MANUAL | Air Conditioner Nanyo 25AA
42
I | STORAGE
1.
Empty the internal water container (refer to Chapter F)
2.
Clean and replace the filter (see also chapter D).
3.
Put the unit in air circulation mode for 2 hours to ensure that the inside
becomes completely dry.
4.
Store cable as shown, protect the unit against dust and store in a dry
place.
J | TROUBLE SHOOTING
Problem
Cause
Solution
The unit does not function
No power supply
Connect to a functioning
outlet and switch on
Water tank indicator is on
Empty the internal water
container
(refer to Chapter F)
The unit does not seem to
perform
In direct sunlight
Close curtains
Windows or doors open,
many people or heat
source in room
Close doors and windows,
or place an extra air
conditioner
Dirty filter
Clean filter.
Air inlet or air outlet locked
Remove blockage
Room temperature lower
than selected value
Change temperature
selection
The unit is noisy
Unit stands uneven
Place on even surface
(less vibrations)
The compressor does not
work
Overheat protection
probably activated
Wait 3 minutes until the
temperature has
decreased, and turn on the
unit again
Remote control does not
function
Distance too great
Make sure the remote
control is correctly aimed at
the control panel < 5m
Remote control signal not
detected by control panel
Batteries empty
Replace the batteries
Never try to repair or dismantle the air conditioner yourself. Incompetent repairs result in
loss of warranty and can endanger the user.
