Kia UVO SYSTEM Sorento, Owner'S Manual

Page: 145 / 236

U
sin
g V
oic
e R
ec
og
niti
on
Voice Recognition
l
5-3
Starting Voice Recognition
Starting Voice Recognition
Shortly press the
key on the steering
remote controller (under 0.8 seconds)
▶ Say a command.
Once voice recognition starts, the voice
command entry window and the six repre-
sentative commands are displayed.
•
If voice recognition is in [Normal Mode],
then the system will say "Please say a
command after the beep", followed by a
beep tone.
•
If voice recognition is in [Expert Mode],
then you will only hear a beep.
(e.g. screen displayed when ‘Help’ is said)
NOTICE
•
For proper recognition, say the command
after the voice instruction and beep tone.
i
Information
•
To change the Normal/Expert set-
t i n g , p r e s s t h e
k e y
▶
Press Setup
and enter the Voice
Recognition settings screen.
Skipping Prompt Messages
While prompt message is being stated
▶ Shortly press the key on the
steering remote controller. (under 0.8
seconds)
The prompt message is immediately
ended and the beep tone will sound. After
the "beep", say the voice command.