EMA -36
ENGINE MECHANICAL SYSTEM
CAUTION
•
Make clean the sealing face before assem-
bling two parts.
•
Remove harmful foreign matters on the seal-
ing face before applying sealant.
•
When applying sealant gasket, sealant must
not be protruded into the inside of oil pan.
•
To prevent leakage of oil, apply sealant gas-
ket ot the inner threads of the bolt holes.
e.
Install oil pan(A).
Uniformly tighten the bolts in several passes.
Tightening torque
9.80 ~ 11.76Nm(1.0 ~ 1.2kgf.m, 7.23 ~ 8.68lb-ft)
A
SBLM16102L
24. Using SST(09231-3C300) install crankshaft damper
pulley(A).
Tightening torque
284.2 ~ 303.8Nm(29.0 ~ 31.0kgf.m, 209.76
~ 224.22lb-ft)
A
KDRF109A
09231-3C300
ECRF061A
25. Install cylinder head cover.
a.
The hardening sealant located on the upper area
between timing chain cover and cylinder head
should be removed before assembling cylinder
head cover.
b.
After
applying sealant(TB1217H), it should
be assembled within 5 minutes.Bead width :
2.5mm(0.1in.)
KDRF231A
c.
The firing and/or blow out test should not be per-
formed within 30 minutes after the cylinder head
cover was assembled.
www.CarGarage.ir
www.CarGarage.ir
www.CarGarage.ir
