19
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
CRUISE
CANCEL
RES
OK
SET
—
+
—
+
MODE
CRUISE
60
MPH
(Type B; Buttons
located on right side
of Steering Wheel)
(Distances are
approximate and
vary depending on
vehicle speed)
(Display on LCD screen)
Smart Cruise Control
(SCC) Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
QR CODE
www.youtube.com/KiaFeatureVideos
A
B
C
172ft
130ft
82ft
98ft
Smart Cruise Control (SCC)
*
†6,22
The Smart Cruise Control (SCC) is designed to maintain a predetermined
distance from vehicles detected ahead by automatically adjusting the driving
speed as needed .
To set/adjust the SCC speed:
•
Push the CRUISE button
A
to turn system ON . The CRUISE
indicator will illuminate on the instrument cluster
•
Accelerate/decelerate to the desired speed
•
Press button
B
down to set the speed . Press the RES+/SET- button
B
up/down to increase/decrease the set speed . The SET indicator light, set
speed and vehicle-to-vehicle distance will illuminate on the instrument
cluster's LCD screen
To set the vehicle-to-vehicle distance:
Press the SCC button
D
on the
steering wheel . The image on the LCD screen
E
will change when
scrolling through the settings . Each time the button
D
is pressed, the
vehicle-to-vehicle distance changes .
To cancel SCC operation:
Press the CANCEL button
C
or the brake pedal .
The LCD screen will display a message that the SCC operation is canceled .
To turn SCC system OFF:
Press the CRUISE button
A
. The CRUISE
indicator on the instrument cluster will turn OFF .
•
To change the Cruise Control mode from SCC to standard Cruise Control,
press and hold button
D
. Repeat to switch modes again (The SCC system
must not be activated to change modes) .
•
For the SCC System to operate, the vehicle must be traveling at a minimum
speed of 20 mph .
•
When following a vehicle, the system can automatically adjust your cruise
speed based on the vehicle detected in front .
QUICK TIPS
REMINDERS:
•
The distance settings are approximations and may vary
depending on vehicle speed and factory settings at the
time . See owner’s manual for more information
•
The SCC is also canceled when the driver’s door is opened,
gear shift is changed out of D (Drive), and various other
conditions . See owner’s manual for other conditions .
•
Keep the system off when not in use to avoid setting a
speed which the driver is not aware of .
•
Cruise Control button must be ON in order to turn SCC
ON/OFF
– The SCC System is operating when driving above
the speed of 6 .0 mph
– SCC system is activated when ignition is turned on .
Speed will need to be reset when ignition is cycled on
– The SCC system remains ON when ignition is cycled .
The speed setting will need to be reset when ignition
is cycled .
•
In standard Cruise Control, the driver needs to manually
assess the distance from other vehicles as the system
will not apply brakes to slow down automatically .
The SCC system is a supplemental
system and is not a substitute for
safe driving. It is the responsibility of
the driver to always check the speed
and distance to the vehicle ahead.
For illustrative purposes only. Your
actual display, buttons and/or
features may vary.
D
D
STEERING WHEEL CONTROLS
Summary of Contents for Forte 2020
Page 1: ......
