manualshive.com logo in svg

Kia 2016 Cadenza, Owner'S Manual

The Kia 2016 Cadenza Owner's Manual is a comprehensive guide that provides detailed information on operating and maintaining your vehicle. You can easily download this manual for free from our website, allowing you to access this valuable resource anytime, anywhere. Navigate your Cadenza's features and functionalities with confidence and convenience.

Share
Download
background image

What to do in an emergency

12

6

You may not be able to identify a low
tire by simply looking at it. Always
use a good quality tire pressure
gauge to measure the tire's inflation
pressure. Please note that a tire that
is hot (from being driven) will have a
higher pressure measurement than a
tire that is cold (from sitting station-
ary for at least 3 hours and driven
less than 1 mile (1.6 km) during that
3 hour period).
Allow the tire to cool before measur-
ing the inflation pressure. Always be
sure the tire is cold before inflating to
the recommended pressure.
A cold tire means the vehicle has
been sitting for 3 hours and driven for
less than 1.6 km (1 mile) in that 3
hour period.

✽

✽

NOTICE

- 

Protecting TPMS

Tampering with, modifying, or dis-
abling the Tire Pressure Monitoring
System (TPMS) components may
interfere with the system's ability to
warn the driver of low tire pressure
conditions and/or TPMS malfunc-
tions. Tampering with, modifying,
or disabling the Tire Pressure
Monitoring System (TPMS) compo-
nents may void the warranty for
that portion of the vehicle.

This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following
two conditions:
1.This device may not cause harmful

interference, and 

2.This device must accept any inter-

ference received, including inter-
ference that may cause undesired
operation.

WARNING

- TPMS WARN-

ING Limitations

• The TPMS cannot alert you to

severe and sudden tire dam-
age caused by external factors
such as nails or road debris.

• If you feel any vehicle instabil-

ity, immediately take your foot
off the accelerator, apply the
brakes gradually and with
light force, and slowly move to
a safe position off the road.

Summary of Contents for 2016 Cadenza




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Cadenza

Metra Electronics 99-3010S Installation Instructions Manual preview
99-3010S
Brand: Metra Electronics Pages: 14
AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
Carcomm CNM-71 Quick Start Manual preview
CNM-71
Brand: Carcomm Pages: 2
Whispbar K392W Fitting Instructions For Basic Carrier preview
K392W
Brand: Whispbar Pages: 14
Wilco Offroad UHG2060/AU Installation Manual preview
UHG2060/AU
Brand: Wilco Offroad Pages: 4
ideus VV950 User Manual preview
VV950
Brand: ideus Pages: 159
Fab Fours H4550 Installation Instructions Manual preview
H4550
Brand: Fab Fours Pages: 13
Belkin F8V9017 User Manual preview
F8V9017
Brand: Belkin Pages: 2
Phonocar VM 320 Instruction Manual preview
VM 320
Brand: Phonocar Pages: 28
Crux RVCFD-79 Manual preview
RVCFD-79
Brand: Crux Pages: 10
Lexus IS220d 2011 Manual preview
IS220d 2011
Brand: Lexus Pages: 609
Toyota Sienna 2000 Operating Manual preview
Sienna 2000
Brand: Toyota Pages: 277
FALCON RIDGE CF-U-1000-RW02 Instructions For Installation And Care preview
CF-U-1000-RW02
Brand: FALCON RIDGE Pages: 8
Curt Group Retrac 207700 Installation Manual preview
Retrac 207700
Brand: Curt Group Pages: 4
Free2Move eSolutions ProWallbox Installation Manual preview
ProWallbox
Brand: Free2Move eSolutions Pages: 33
Chevrolet 2005 Colorado Owner'S Manual preview
2005 Colorado
Brand: Chevrolet Pages: 416
Subaru Crosstrek 2016 Quick Reference Manual preview
Crosstrek 2016
Brand: Subaru Pages: 20

Brands by name

Popular brands

Load more brands