manualshive.com logo in svg

Kia 2016 Cadenza, Owner'S Manual

The Kia 2016 Cadenza Owner's Manual is a comprehensive guide that provides detailed information on operating and maintaining your vehicle. You can easily download this manual for free from our website, allowing you to access this valuable resource anytime, anywhere. Navigate your Cadenza's features and functionalities with confidence and convenience.

Share
Download
background image

4 97

Features of your vehicle

Battery saver function   

• The purpose of this feature is to

prevent the battery from being dis-
charged. The system automatically
turns off the parking lights when
the driver removes the ignition key
(smart key: turns off the engine)
and opens the driver-side door.

• With this feature, the parking lights

will be turned off automatically if
the driver parks on the side of road
at night.
If necessary, to keep the lights on
when the ignition key is removed,
(smart key: turns off the engine)
perform the following:
1) Open the driver-side door.
2) Turn the parking lights OFF and

ON again using the light switch
on the steering column.

Headlight escort function 
(if equipped)

The headlights (and/or parking lights)
will remain on for approximately 5 min-
utes after the ignition key is removed
or turned to the ACC or LOCK posi-
tion. However, if the driver’s door is
opened and closed, the headlights are
turned off after 15 seconds.
The headlights can be turned off by
pressing the lock button on the trans-
mitter (or smart key) twice or turning
off the light switch from the headlight
or Auto light position.
If the driver gets out of the vehicle
through other doors (except driver's
door), the battery saver function
does not operate and the headlight
escort function does not turn off
automatically causing the battery to
be discharged. In this case, make
sure to turn off the headlights before
getting out of the vehicle.

Daytime running light 

The Daytime Running Lights (DRL)
can make it easier for others to see
the front of your vehicle during the
day. DRL can be helpful in many dif-
ferent driving conditions, and it is
especially helpful after dawn and
before sunset.
• The DRL system turns ON when:

1. The headlight switch is OFF or

the taillight switch is ON.

2. The parking brake is released.

• The DRL system turns OFF when:

1. The headlight switch is ON.
2. The engine is OFF.
3. The parking brake is applied.

LIGHTING

Summary of Contents for 2016 Cadenza




































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Cadenza

Jeda Wireless Pad Manual preview
Wireless Pad
Brand: Jeda Pages: 8
Jeep 2009 Wrangler Owner'S Manual preview
2009 Wrangler
Brand: Jeep Pages: 496
GMC 2005 Sierra Denali Owner'S Manual preview
2005 Sierra Denali
Brand: GMC Pages: 428
Mercedes-Benz GLA 250 2019 Operator'S Manual preview
GLA 250 2019
Brand: Mercedes-Benz Pages: 346
Thule Kit 1514 Instructions preview
Kit 1514
Brand: Thule Pages: 4
GMC ANDROID INTERFACE Instruction Manual preview
ANDROID INTERFACE
Brand: GMC Pages: 18
Prorack K496 Fitting Instructions For Basic Carrier preview
K496
Brand: Prorack Pages: 15
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
Gator HUDGPS1 Quick Start Manual preview
HUDGPS1
Brand: Gator Pages: 2
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
Great Wall WEY VV5 Service Manual preview
WEY VV5
Brand: Great Wall Pages: 18
WIX WP9378 Installation Instruction preview
WP9378
Brand: WIX Pages: 2
BMW 323Ci Manual preview
323Ci
Brand: BMW Pages: 189
Discount Car Stereo A2DIY-MBR Quick Start Bluetooth Installation Manual preview
A2DIY-MBR
Brand: Discount Car Stereo Pages: 8
Ferve F-2024 Operating Instructions Manual preview
F-2024
Brand: Ferve Pages: 28
Brink 4698 Fitting Instructions Manual preview
4698
Brand: Brink Pages: 26
Conrad 85 51 49 Operating Instructions Manual preview
85 51 49
Brand: Conrad Pages: 50

Brands by name

Popular brands

Load more brands