Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Soltice
®
Metal Multiple Seating - Reconfiguring Multiple Seating
Repair & Replacement Instructions
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2019 Krueger International, Inc. All Rights Reserved • Code KI-RR-000027/KI/PDF/0819
13. If re-installing a 45 degree
connector table, 90 degree
connector table or a center
connecting table, move two
multiple seating units close enough
together so the tabletop to be
installed can be supported by
connecting table brackets of two
seating units (Figures 5 & 6).
14. To connect the
45 degree
connector table
,
90 degree
connector table
or
center
connector table
onto the two
connector table brackets. Align the
pre-drilled holes of the underside
of the tabletop with the mounting
holes of each table bracket and
secure using six #10 x
3
/
4
” wood
screws per bracket removed in
step 2 (Figures 5 & 6).
15. To connect the
connecting end
table
, place the table (with support
leg attached) onto the connecting
table bracket of the seat it will join
to. Align the pre-drilled holes of
the underside of the table with the
mounting holes of the table bracket
and secure using six #10 x
3
/
4
”
wood screws removed in step 2
(Figure 5).
Figure 5
connecting
table bracket
#10 x / ”
Phillips wood
screws
3
4
center
connecting
table
45 degree
connector
table (inside)
connecting
table
bracket
connecting
end table
Figure 6
90 degree
connector
table (inside)
#10 x / ”
Phillips wood
screws
3
4