1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2014 Krueger International, Inc. All Rights Reserved • Code KI-62459R1/KI/PDF/0814
Backbone
®
Media Platform
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Monitor Display Wiring
16. Before mounting the
monitor; plug in audio,
video and electrical wires to
their proper ports. Confirm
that there is clearance or
enough space between the
Monitor Support or the wall
to accommodate the cords.
You may need to add spacers
or change the location of
the mounting hardware to
clear all the cords. Route
the audio and video wires to
the switcher and plug in the
110v electrical cord.
Note:
depending on the
hardware chosen, there may be
a power sensor control item. See
separate wire instructions.
