7
Caster Forks and Stems
3. If you are replacing your forks continue for instructions. For a regular caster fork, remove caster wheel
by removing two socket head screws and two spacers using two 4mm Allen wrenches. For a single
sided fork, remove the socket head screw, axle shaft and E-Clip using a 5mm Allen wrench.
Install Caster Fork and Stem
1. Install stem (A) into fork (B) with washer (E) and nut (F) using a 16mm wrench.
2. Install caster wheel (H) into fork (B) with two screws (C), a threaded barrel (D) and two spacers (G) using
two 4mm Allen wrenches.
NOTE: There are two sizes of caster stems (standard and +3/4") and three sizes of forks (tall,
standard and short) that can be used. The image below shows the stems and forks. The installation
process is the same for whichever stem and fork you use.
3. Install assembly to caster housing by installing the two socket screws seen in step 2 on previous page.
Regular Caster Fork
Single Sided Caster Fork
A
B
C
C
D
E
F
G
G
H
Standard
Stem
+3/4”
Stem
Short
Fork
Standard
Fork
Tall
Fork
