The LoRa® Network management menu gives access to the LoRa® radio settings, the
selection of Internal or External Network Server, the registration of LoRa® devices and the sending of
configuration commands to registered devices.
4.1.5
LoRa®
This menu allows you to configure the communication information of the Radio LoRa®.
4.1.5.1
LoRa® Radio
Note
When submitting these settings, the ITG needs to be restarted.
The region field corresponds to the frequency pattern practiced in different countries. The
selected region, indicates which will be the standard used in the communication between the
endpoint (s) and the ITG 200, and also, delimits the frequency values allowed by the chosen region.
●
Central Frequency: Frequency, in MHz, used to configure the LoRa® Radio. It is from it that
the frequencies of the channels are calculated.
●
Antenna gain: Field used to indicate the value, in dBi, of the gain of the antenna connected
to the device.
●
Channel 1-8: Shows the frequency of the channel, which is determined according to the
region and the central frequency chosen. The central frequency is adopted as the central
value between channels 1 to 8, and the channels are configured in block from it.
●
STD and FSK channels: Shows the frequency value of the standard LoRa® and FSK
channel, in MHz, calculated according to the specifications of the chosen region. The FSK
channel only applies to the EU868 region.
Note
For more details see the LoRaWAN specification
21
Summary of Contents for ITG 200Indoor
Page 1: ...User Manual ITG 200 Indoor...
