EN
6
How To Use
A. For Start Up
Connect Accessories
B. After Finishing Work
Suggestion:
In case of long operation, it is recommended that a short interval of rest is taken after every 30 minutes
of usage.
For DRY Vacuum Cleaning
HEPA Filter
- Inserting the HEPA Filter
(refer to cleaning & maintenance part B on page 5).
For WET Vacuum Cleaning
Wet Filter Sponge
Attention: DO NOT use a HEPA Filter for wet cleaning
- Put a WET Filter Sponge over the filter holder for wet vacuum cleaning.
- Ensure firm seating of the sponge filter
(refer to cleaning & maintenance part C on page 5)
Never use the appliance without installing the HEPA filter or Wet Filter Sponge. Please clean the
filters regularly for better performance.
- Insert the Suction Hose into the Suction Inlet
- Connect the Metal Tubes with Suction Hose.
- Join the Metal Tube and Floor Nozzle together.
- Plug in the main switch.
- Press the Power ON/OFF Switch.
a. Select “I” position to turn ON the appliance.
b. Select “O” position to turn OFF the appliance.
1. Switch off the appliance and pull the main switch out of the socket.
2. Wind up the power cord onto the handle A,B,C. Begin winding up the cord at the cleaner end and
not the plug end to prevent the power cord from tangling up.
3. Empty the dirt Dust Container and clean the vacuum cleaner.
4. Ensure the HEPA filter or Wet Filter Sponge are dry prior into installation.
5. Hang the Suction Hose with the Floor Nozzle in the bracket and pack all the cleaning tools into
accessories slot.
Warning!
