EN
5
Cleaning & Maintenance
Operating Features
(B) HEPA Filter Cleaning
(C ) Wet Filter Sponge Cleaning
Filter Cleaning Function
When the appliance is not in use for a prolonged period, please turn it off, unplug it, pack it well,
and store it in dry cool place.
If suction performance drops :
Step 1 -
Select Power ON/OFF switch to position “I”.
Step 2 -
Close the nozzles or suction hose opening with
the palm of your hand.
Step 3 -
Press the Filter Cleaning Button 10-15 times
to start filter cleaning. The resulting stream of
air removes attached dust from the slats of the
filter elements.
Removal of HEPA Filter (Fig 2)
1st
1st
2nd
2nd
(Fig 5)
Installation of HEPA Filter (Fig 3 & 4)
Step 1 - Open & lift up the Motor Housing Assembly and remove the HEPA Filter (Fig 2).
Step 2 - Pat to remove the dust from the HEPA filter. Do not rinse the HEPA Filter under water.
Step 3 - Reinstall the HEPA Filter onto the filter holder. (Fig 3 & 4).
Step 1 - Installation / removal of wet filter sponge. (Fig 5)
Step 2- Only clean the filter sponge under running water. Do not wipe or brush.
Step 3 - Let it dry completely prior to installation.
Step 4- Reinstall the filter sponge onto the filter holder.
1
Install
Remove
Note
2
3
