KHIND EAC20, Instruction Manual

Page: 3 / 28

EN
3
Parts Identification
Caution
Specifications
ON/OFF Button
C) Remote Controller Panel
Timer Button
Mode Button
Cool / Humidify Button
* Specifications are subject to change without prior notice.
Wind Speed Button
Swing Button
Model
Voltage
Power
Water Tank Capacity
Fan Speed
Air Delivery
Water Consumption
Net Weight
Product Dimension (LxWxH) EAC20
220-240V~ 50Hz
110W
20 Litres
480~1260rpm
9.17m /min ; 323CFM
2000mL/h
8kg
390 x 342 x 897mm
1. Use this appliance with specified voltage as stated on the rating sticker. Before connecting to
AC mains, make sure the specified voltage corresponds to the AC supply to your house.
2. This cooler must be operated only under the following conditions.
- Room temperature : 18˚C to 45˚C
- Water (refilling) temperature : <45˚C
3. Do not operate the cooler in dirty, dusty or polluted environments.
4. Insert the plug to the AC mains securely. Do not remove power plug by pulling through its
cord. Do not operate with wet hands or when the plug is wet.
5. Do not fill water beyond maximum capacity of the water tank.
6. Do not operate the cooler with cool /humidify function if the water level is below the
minimum mark.
7. Do not operate the cooler in an enclosed environment. It will cause dampness and damage to
the paper materials.
8. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
9. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
3