KHADAS Tone2, Quick Start Manual

Page: 16 / 20

Can I use the Tone2 to receive a signal from the TV via coaxial and send it to the
amplifier via RCA?
Yes. Set the input mode as ‘S/PDIF’ or ‘Auto’, Tone2 will output to the RCA.
How do I adjust the HID (system) volume using the volume knob?
When Tone2 is not at or above maximum volume, turning the volume knob clockwise will
increase the device’s hardware volume. Once Tone2 is at maximum volume, continuing to
turn the knob clockwise will cause the RGB indicator to flash turquoise 3 times.
Continuing to turn the knob clockwise after this point will instead increase the HID
(system) volume of your PC.
Why can’t I adjust the HID volume whilst playing DSD formatted audio?
Tone2 does not support HID volume adjustment whilst playing DSD formatted audio.
Can I supply power to the USB (I2S) interface using my computer, PC or laptop?
No. Please instead connect a linear power supply or battery bank to the USB (I2S) interface.
* For more technical assistance, visit forum.khadas.com/c/khadas-tone