1 Video Output
- Use the Scroll Up/Down button to select Video Output Format. Press the
OK button to enter the Video Output Format menu. Use the Scroll Up/Down button to select
the desired Video Output Format: MPEG-2 or AVC then press the OK button to set. Factory
default is MPEG-2 for HDM-1000 & HDM-2000, AVC for HDM-4000.
1 HDCP
- Use the Scroll Up/Down button to select HDCP. Press the OK button to enter the
HDCP menu. Use the Scroll Up/Down button to select the proper control: Enable or Disable.
The Factory default is Enable. If the modulator has more than one video input scroll through
the Advanced Menu for additional HDCP menus.
1 Audio Input
– Use the Scroll Up/Down button to select. Press the OK button to enter the
Audio Input menu. Use the Scroll Up/Down button to select the Audio Input option: Analog,
Coaxial, or Optical. The factory default is Analog. Press the OK button to set. If the
modulator has more than one Audio Input scroll through the Advanced Menu for the
additional Audio Input menus.
1 Audio Output
– Use the Scroll Up/Down button to select Audio Output. Press the OK
button to enter the Audio Output menu. Use the Scroll Up/Down button to select the Audio
Output option: MPEG2 Layer I(MP2), AAC, AC-3 Pass Through. The factory default is MP2.
Press the OK button to set. If the modulator has more than one Audio output scroll through
the Advanced Menu for the additional Audio Output menus.
1 Closed Caption
- Use the Scroll Up/Down button to 1 Closed Caption. Press the OK
button to enter the 1 Closed Caption menu. Enable / Disable 1 Closed Caption control. If the
modulator has more than one Video Output scroll through the Advanced Menu for the
additional Closed Caption menus.
NOTE: WHEN USING CLOSED CAPTIONING- USER MUST CONNECT FROM THE
CONTENT SOURCE THE COMPOSITE OUTPUT OR CC OUTPUT SOURCE TO THE
ENCODER'S CVBS INPUT CONNECTOR
To
exit the Advanced Menu
use the Scroll Up/Down button to select Exit then press the OK
button. Exit Exit Menu will appear on the LCD screen. Press the OK button twice to exit.
****** IMPORTANT – SAVE THE SETTINGS ******
Once the settings are made and the modulator is programmed (a) remove power from the unit by
disconnecting the power cable (b) wait 5 seconds and (c) reconnect the power cable to the unit.
This will allow the modulator to capture the new settings.
HDM-1000/2000/4000 Manual V1.0
12
