ENGLISH
Chapter 5: KGUARD Web Client
86
DVR User’s Manual
Setting Up with DHCP
If your network uses a DHCP server, do the following:
1
On the Main Menu, click
Remote Setting
.
2
On the left panel, click
Network > Network
. The Network screen appears.
3
On
Type
, select
DHCP
.
4
Specify the
Client Port
,
HTTP Port
, and
DNS 2
(if necessary).
Note:
• Obtain these information from your network administrator or your Internet Service Provider (ISP).
• If you cannot use the either of the two default ports, 80 or 9000, the specified port may be occupied by other
programs or it is being blocked by your service provider. Enter other port number. In this case, you need to
add the port number after the IP address. For example, if you set the
HTTP Port
as 85, you need to enter the
IP address as “192.168.3.103:85”.
5
Enable
UPnP
if you are using Universal Plug and Play (UPnP) devices.
6
After all settings are complete, click
Save
.
« TIP »
To cancel any modifications and retain the existing settings, click
Refresh
.
