ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
51
4.4 Setting the Network
To enable remote monitoring, recording, playing, or configuring the setting, you need to configure the network settings
first. There are five types of network setup: DHCP, PPPoE, Static IP, and DDNS. Consult your Internet Service Provider
(ISP) to determine the type of network connection you are using and the required parameters to complete the setup.
4.4.1 Network Settings
DHCP Configuration
The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select
Main Menu
>
NETWORK
.
3
On
Type
, select
DHCP
.
4
Specify the
Client Port
and
HTTP Port
numbers.
5
After all settings are complete, click
Apply
.
6
When data saving is complete, click
OK
.
PPPoE
The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating Point-to-Point Protocol (PPP)
frames inside Ethernet frames.
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select
Main Menu
>
NETWORK
.
3
On
Type
, select
PPPoE
.
4
Specify the
Client Port
and
HTTP Port
numbers.
5
Enter the
User Name
(an email address) and
Password
.
6
Specify the
DNS 1
/
DNS 2
IP addresses.
7
To enable UPnP feature, select
Enable
.
