It is important to remember that once the MaGravs Power Unit is connected
and turned on, do not turn off or unplug the unit from that point onwards.
It MUST keep running continuously in order for it to work effectively.
Please read all the instructions below before connecting your MaGravs Power
Unit to your household socket.
It is time for Humanity to reconnect with the energetic plasma world!
What You Need To Know
Installation of the Magravs Power Unit is simple:
• there are no hard and fast rules, only guidelines
• every installation is different and you get to decide what’s optimal for your home
• the point of the Magravs Power Unit is to allow plasma energy to act on the
wiring of your home
• to make up the required loads for the initial hookup stage, you may need to
connect a few lamps to the Magravs Power Unit via a power strip. Power strips
and lamps are not included with the Magravs Power Unit.
Simply connect your Unit to an available socket at home then connect the
fridge.
It’s been found that the more distance between the breaker box and the socket,
the better resultsthat are achieved.
The greatest benefit is seen with appliances connected to the rest of the
household. The lamp(s) connected to the Unit simply serve(s) as a load from
which plasma is reflected back into the wiring of the household.
U S E R G U I D E
U S E R G U I D E
6
7
Your Magrav Unit, a New Paradigm in Energy
Copper wires have been used to transmit electricity via electron vibration.
This is the old, outdated paradigm, which relies on a very small spectrum of
what exists in nature.
Now, with magnetical-gravitational (MaGravs) technology, power is released
and transmitted via the nano-coating of copper.
The nano layers absorb ambient plasma energy and release usable plasma,
which is much more powerful than simple electron vibration.
Plasma is found everywhere around us - in the air, our bodies, around the planet
and in outer space.
Through the nano layers, this boundless energy is then converted to usable
energy which can power appliances at home.
Our first generation Magravs Power Units
required CONDITIONING in order for the Unit
to operate properly.
W i t h a d v a n c e s i n technology, we are now
able to omit this, thereby allowing the Magravs
Power Unit to be truly plug and play.
However, Nano-coating all wires in the
household will still happen in a gradual and
systematic manner through the Magravs
Power Unit.
