The default fabric roll direction of your shade is “reverse”. That is, the fabric rolls from the back side of the top tube. If you want
the fabric to roll from the front side of the top tube, simply roll your shade down until it rolls itself back up on the other side of the
shade. If you reverse the roll of your fabric, you will need to move the Ring so it does not interfere with the fabric (see below).
The default placement for your Ring is in the front of your shade. That is, the Ring is
placed near the front of the fabric roll. If you reversed the roll of your fabric, we recom-
mend that you change the location of your Ring.
Before you begin, make sure the shade has been removed from the brackets. To begin,
remove your bracket cover from the Crank Mechanism. Then remove the two screws
from the outside of the Crank Mechanism (Fig R). Then, reverse the Ring and re-install
the Screws (Fig S). Now you can re-install the shade.
Fig. R
Fig. S
Maintenance
To clean your shade simply rinse with water and scrub with any non-abrasive cleaner (using bleach or other abrasive cleaners will
void your warranty). Roll the shade down to air dry.
303.652.6164 (p)
M1041
www.shadeinfo.com
Don’t forget to send us your warranty/registration card.
Need Help?
Complete installation video is available at www.shadeinfo.com
Pg. 4
CHANGE THE ROLL DIRECTION OF YOUR SHADE
MOVING THE RING FROM THE FRONT TO THE BACK OF THE SHADE
