...touch the difference
Version 1.0 (2010/03/18) ● © 2010 by MaxPoint Handelsges. mbH
3. Installation
3.1 System requirements
This keyboard requires a PC with USB connection and one of the following operating systems:
Windows 2000 / XP / Vista / 7
For the installation of the keyboard under the mentioned above operating systems you need NO special
driver!
3.2 Installation of the USB receiver
In order to install your keyboard, please perform the following steps:
Connect the USB receiver to a free USB port on your computer.
•
Advise: Please ensure, that the USB receiver has a minimal distance of 20 cm
to metallic dividing walls, other computer cases, monitors, ZIP drives, loudspeakers
and switching power supplies.
All mentioned above state-of-the-art operating systems with Plug & Play support will recognize your key-
•
board automatically and load the required drivers. During the phase of installation your operating system
informs you via changing Pop-up information windows on the task-bar about the current status of instal-
lation. Please be patient, until the system informs you fi nally about the successful installation. The USB
receiver is now ready for operation.
Older operating systems not always support automatic recognition of USB devices. If you have attached your
USB receiver and exactly this error occurs on your system, you have the following alternatives to solve the
problem:
Perform an update of your operating system and return to Step 3.2
•
In some cases the installation CD of your operating system is necessary according to the instructions on
•
your screen. In this circumstance please follow these instructions*.
Check whether your BIOS system supports USB keyboards*. Some main board manufacturers offer BIOS
•
up-dates for download over the Internet.
Ensure in your system settings, that the used USB connection was not deactivated in your operating
•
system*.
Should your system updates keep out of success, it is recommended to test the keyboard with
•
another PC with the same operating system to rule out a hardware damage of the USB receiver.
* Refer to the documentation of your PC for details.
Information on disposal of old batteries (Battery Regulation)
The new Regulation obliges battery manufacturers and importers to take back, sort and dispose all old batteries. The con-
sumer is obliged to give back used batteries in retail stores or in municipal collection points. The disposal in municipal waste
is explicitly prohibited according to Battery Regulation. You can send batteries purchased from us after consumption to the
following address via suffi cient stamped mail:
MaxPoint Handelsgesellschaft mbH, Kurt-Fischer-Straße 50, D-22926 Ahrensburg
Batteries, which contain pollutants, are marked with the symbol of a crossed-out dustbin,
similar to the symbol in the illustration. The chemical description of the pollutant is
situated below the symbol of the dustbin. “Cd” stands for Cadmium, “Pb” for Lead, “Hg”
for Mercury.
7
Summary of Contents for KSK-5200 RFM
Page 1: ......
