
Calibration Procedures
6
Adjustments procedures
U3606A User’s and Service Guide
207
6
Enter the actual applied input (see
“Entering adjustment values” on
7
Press
to start the adjustment. The display “CALib” in the lower
secondary display starts flashing to indicate that the calibration is in
progress.
•
Successful completion of the adjustment is indicated by a short beep
and the primary display briefly showing “PASS”.
•
An adjustment failure is indicated by a long beep, the primary
display showing “FAiL” and a calibration error number appearing in
the upper secondary display. Correct the problem and repeat this
procedure.
8
Repeat
through
for each gain adjustment point shown in
.
9
Verify the AC current gain adjustments using the
verification test” on page 159
.
Capacitance gain adjustment procedure
Review the
“Test Considerations” on page 145
sections before beginning this procedure.
1
Press
to enter the capacitance gain calibration.
2
The primary display will show the uncalibrated value and the upper
secondary display will show the reference value of the adjustment item.
3
Configure each adjustment item shown in
Table 6-8
AC current gain adjustment
Adjustment item
Input current
Input frequency
1.0000 mA, 1 kHz
1 mA
1 kHz
10.0000 mA, 1 kHz
10 mA
1 kHz
100.000 mA, 1 kHz
100 mA
1 kHz
1000.00 mA, 1 kHz
1000 mA
1 kHz
O U T
S B Y
Summary of Contents for U3606A
