3
Default Setting Configurations
50
Keysight U1241B and U1242B User’s and Service Guide
rSt
Reset
dFAU
Resets the multimeter to the factory settings by
pressing and holding
for more than 1
second. A beep sound indicates the reset is being
done.
dFAU
Temperature
[c]
d-CF
Sets temperature measurement to °C, pressing
to change measurement unit to °F
d-CF
[d]
d-F
Sets temperature measurement to °F
d-FC
Sets temperature measurement to °F, pressing
to change measurement unit to °C
d-C
Sets temperature measurement to °C
[a] To activate the multimeter after it has auto power off, press any button to resume back to respective functional mode.
[b] The firmware is factory-installed and is not field-upgradeable.
[c] To view Temperature (
) menu, press
for more than one second.
[d] After this setting has been changed, resetting the multimeter will not revert it to the original default factory setting. The current setting will be
the new default setting.
Table 3-1
Available setting options in Setup mode (continued)
Menu item
Available setting options
Default factory
setting
Setup
Description
Selection
Description
tnP
tnP