Keysight U1241AN, User'S And Service Manual

Page: 47 / 85

Default Settings Configurations 3
Keysight U1241AN User’s and Service Guide 47
Table 3-1 Available setting options in Setup mode
Menu item Available setting options
Default factory
setting
Setup Description Selection Description
rHd Trigger hold
OFF Enables Data Hold (manual trigger)
500
100–1000
Sets variation count that determines Refresh Hold
(auto trigger)
SCA Percentage scale
0–20 mA,
4–20 mA
Sets percentage scale readout for 0mA to 20 mA or
4 mA to 20 mA
4–20 mA
FrE
Minimum frequency
can be measured
0.5 Hz, 1 Hz,
2 Hz, 5 Hz
Sets the minimum frequency that can be measured
in AC measurement mode
0.5 Hz
bEP
Frequency of beep
sound
2400 Hz,
1200 Hz,
600 Hz,
300 Hz
Sets frequency of beep sound of the multimeter
2400 Hz
OFF Disables beep sound of multimeter
t P
Thermocouple
tYPE Sets thermocouple type to K-type
tYPE K
tYPE
[a]
Sets thermocouple type to J-type
tYPE mV Sets 100 mV measurement for T1 input
Log Data logging
Hand Enables manual data logging
Hand
1–9999 s
Sets interval for automatic data logging from 1 to
9999 seconds. Press to toggle through the
digit to be adjusted.
APF
Auto power off
[a]
1–99 m Sets timer in minutes for auto power off
15 m
OFF Disables auto power off
Lit Backlight timer
1–99 s
Sets timer in seconds for auto turn-off for backlight
display
15
OFF Disables auto turn-off for backlight display
dAC
Default AC or DC for
voltage and current
measurements
dC, AC
Defines the preferred setup of AC or DC for voltage
and current measurement once multimeter is
turned on.
dC
n