Safety and Regulatory Information
2
TS-5020 Automotive Electronics Functional Test System Site Preparation and Installation Guide
2-3
Environmental Conditions
The TS-5020 Automotive Electronics Functional Test System is
designed for indoor use only.
shows general environ-
mental requirements.
Before Applying Power
Verify that the product is set to match the available line voltage
and all safety precautions are taken. Note the external markings
of the instruments described in
.
WA R N I N G
DO NOT REMOVE RACK PANELS OR INSTRUMENT COVERS. Operating
personnel must not remove any rack panels or instrument covers.
Component replacement and internal adjustments must be made only
by qualified service personnel. Products that appear damaged or
defective should be made inoperative and secured against unintended
operation until they can be repaired by a qualified service personnel.
WA R N I N G
The protection provided by the TS-5020 system may be impaired if
the system is used in a manner not specified by Keysight.
Table 2-1
Environment Requirements
Environment Conditions
Requirements
Maximum Altitude
2000 meters
Temperature (Operation)
5 C to 40 C
Maximum Relative Humidity
The test system is designed to operate
in the range from 5% to 80% relative
humidity (non-condensing).
C A U T I O N
This product is designed for use in Installation Category II and
Pollution Degree 2, per IEC 61010-1 and 664 respectively.
