Banded waveguide receiver mini-modules (Virginia Diodes Inc.)
Waveguide flange
Frequency GHz
Standard receiver only modules High sensitivity receive only module with external
fixed attenuator
WR15
47 to 77
N5262BR15 - STD
N5262BR15 - 001
WR12
55 to 95
N5262BR12 - STD
N5262BR12 - 001
WR10
67 to 110
N5262BR10 - STD
N5262BR10 - 001
Notes
1. The high sensitivity modules have the same dynamic range, with about 25 dB lower noise floor and lower saturation point.
2. Modules include a selectable option for use with a 1.2 m cable set (Option 120) or a 5m cable set (Option 500).
3. A power supply is included with each module ordered.
4. All modules are compatible with PNA/PNA-X or test set controller and have cable options for direct connection or test set connections.
Dimensions for waveguide transmission reflection modules (Virginia Diodes Inc.)
Module
Width
Length
Height
Standard
5.0 inches
15.275 inches including waveguide, WR1.5 to WR15.
10.25 inches including waveguide WR1.0
3.5 inches (feet 1.25 inches)
Mini-modules
3.0 inches
10.8 inches including waveguide, WR10 to WR15
2.35 inches (feet 0.75 inches)
Waveguide designation equivalent table
MIL-DTL-85/3C
IEEE Std 1785.1
Frequency range
WR-15
WM-3759
50 GHz – 75 GHz
WR-12
WM-3099
60 GHz – 90 GHz
WR-10
WM-2540
75 GHz – 110 GHz
WR-08
WM-2032
90 GHz – 140 GHz
WR-06
WM-1651
110 GHz – 170 GHz
WR-05
WM-1295
140 GHz – 220 GHz
WR-04
WM-1092
170 GHz – 260 GHz
WR-03
WM-864
220 GHz – 330 GHz
WR-02
WM-570
330 GHz – 500 GHz
WR-1.5
WM-380
500 GHz – 750 GHz
WR1.0
WM-250
750 GHz – 1.1 THz
Reference: IEEE Standard for Rectangular Metallic Waveguides and Their Interfaces for Frequencies of 110 GHz and Above — Part 1: Frequency Bands
and Waveguide Dimensions
Banded waveguide transmission reflection mini-modules (Virginia Diodes Inc.)
Waveguide flange
Frequency GHz
Standard transmission
reflection modules
Transmission reflection modules with 0 to 30 dB mi-
crometer driven attenuator
WR15
47 to 77
N5262BW15 - STD
N5262BW15 - 001
WR12
55 to 95
N5262BW12 - STD
N5262BW12 - 001
WR10
67 to 110
N5262BW10 - STD
N5262BW10 - 001
Notes
1. Modules include a selectable option for use with a 1.2 m cable set (Option 120) or a 5m cable set (Option 500).
2. A power supply is included with each module ordered.
3. All modules are compatible with PNA/PNA-X or test set controller and have cable options for direct connection or test set connections.
Millimeter-wave calibration kits (Virginia Diodes Inc.)
Waveguide flange
Frequency GHz
Calibration kit
WR2.2
325 to 500
N5262AC02
WR1.5
500 to 750
N5260AC01
WR1.0
750 to 1.1 THz
N5262AC01
20 | Keysight | Antenna Test – Selection Guide