Keysight N5244AU- H29 Installation Note Download Page 36 | Manualshive

Page: 36 / 42

Keysight N5244AU- H29 Installation Note Download Page 36

Installation Note N5245-90109 35

Keysight Extended Power Range and Bias Tees
Upgrade Kit Order Numbers: N5244AU-921 and N5245AU-921

Step 22.Reinstall Front Panel Assembly

For instructions on reinstalling the front panel assembly, click the Chapter 7

bookmark “Removing and Replacing the Front Panel Assembly” in the PDF

“Downloading the Online PNA Service Guide” on page 6

.

Step 23. Position the Cables and Wires to Prevent Pinching

On the top side of the PNA, carefully position the grey flex cables so they can’t

be pinched between the covers and the rails.
On the bottom side of the PNA, carefully fold or push down the ribbon cables

and wires so they can’t be pinched between the hardware and the outer cover.

Ribbon cables and wires must never be positioned on top of hardware.

Step 24.Install the New Inner Cover

If not already done, discard the old inner cover. Install the new inner cover

(part number N5247-00004) included with this upgrade kit. For instructions,

click the Chapter 7 bookmark “Removing the Covers” in the PDF Service
Guide

Step 25.Reinstall the Outer Cover

For instructions, click the Chapter 7 bookmark “Removing the Covers” in the
PDF Service Guide

«
...
34
35
36
37
38
...
»

Summary of Contents for N5244AU- H29











































Reviews:

No comments