N5245-90002 User’s and Service Guide
37
N5244/45AS Option H85
Specification
Specification
The N5244/45AS models are tested to the performance closest matching their configuration.
Specifications for the N5244/45AS with Option H85 (Delete Bias Tees) are equivalent to the
N5244/45A with Options 200/219 (2-Port PNA-X, Source/Receiver Bias Tees) or
Options 400/419 (4-Port PNA-X, Source/Receiver Bias Tees). Deviations from these
specifications are documented in this manual.
Specifications are both viewable and printable from the PNA-X Series Data Sheet. Visit our web
http://www.keysight.com/find/pna
, enter your analyzer model number (N5244/45A) in
the search field and select the data sheet or manual of your choice.
The specifications for Option H85, when configured in high power or large signal capability, are
not tested nor guaranteed.
Service Information
Information can be found in the Keysight 2-Port and 4-Port PNA-X Network Analyzer Data
Sheet and Technical Specifications (N5245-90008). This document can be found using the our
web site at
http://www.keysight.com/find/pna
, enter N5245-90008 in the search field.
Service information can be found in the Keysight N5244A and N5245A 2-Port and 4-Port PNA
Microwave Network Analyzers Service Guide (N5245-90001). This document can be found using
the our web site at
http://www.keysight.com/find/pna
, enter N5245-90001 in the search field.
Replacement parts and procedures are listed in Chapters 6 & 7.
The Keysight Technologies PNA-X Series Microwave Network Analyzers N5244/45A will display
Option H85. Firmware revision A.08.60.07 or higher must be used for this option. Service
software is available for servicing the N5244/45A at local service centers.
Follow the N5244/45A Service Guide instructions for all repair, replacement procedures, tests
and adjustments.