Keysight N2820A, User Manual

Page: 8 / 110

8 N2820/1A User’s Guide
1 General Information
Introduction
Table 1 Compatible Oscilloscopes with Number of Probes Supported
Infiniium Dual-Grid View
The N2820A probe provides two channel-input cables which allow
two simultaneous views of the current waveform: a high-gain
zoomed-in and a low-gain zoomed-out view. On Infiniium
oscilloscopes, both zoomed-in and zoomed-out waveforms can be
simultaneously displayed in dual-grid view , where each waveform
can be viewed in a different time span. To learn more about
dual-grid view, refer to “To Simultaneously View
Zoomed-In/Zoomed-Out Waveforms” on page 36. InfiniiVision
oscilloscopes do not support dual-grid views. The zoomed-in
channel has 500 kHz bandwidth and the zoomed-out channel has
Is Your Oscilloscope Software
Up-to-Date?
Keysight periodically releases
software updates to support your
probe, fix known defects, and
incorporate product enhancements.
To download the latest firmware, go
to www.keysight.com and search for
your oscilloscope’s topic. Click on
the “Drivers, Firmware & Software”
tab.
Number of Probes Supported
Oscilloscope N2820A
2 Channel Probe N2821A
1 Channel Probe
Infiniium Oscilloscopes (firmware version 4.2 or above)
90000A, X-, and Q-Series not supported not supported
9000 H-Series 2
a
or 4
b
a Dual-Grid View available.
b If secondary cables are
not connected.
4
c
c On four channel oscilloscope.
9000A-Series 2
a
or 4
b
4
c
InfiniiVision Oscilloscopes (6000 X firmware version 6.0 or above, 4000 X firmware version 3.10 or
above, 3000 X firmware version 2.30 or above)
6000 X-Series 2 or 4
b
4
c
4000 X-Series 2 or 4
b
4
c
3000 X-Series 2 2
d
d Maximum of 2 probes on two or four channel oscilloscope.
2000 X-Series not supported not supported