Keysight M9021A, Installation Manual

Page: 22 / 46

22 Keysight PXIe System and Cable Interface Installation Guide
Using Different PXIe Chassis
8
Push inward on the module until it is firmly seated in the chassis. (Do not force
the handle if there is resistance; this may damage the connectors and/or
backplane.)
9
Pull up on the ejector/injector handle to firmly seat the module.
10
Tighten the module’s captive retaining screws.
11
A slot blocker should be installed immediately to the left of the slot 1 module
to ensure proper airflow.
12
Attach the PCIe cable by first pulling back on the retractor ring. With the
keyed slot aligned with the key ridge on the PCIe adapter, insert the cable
connector into the cable port connector on the adapter until the cable locks in
place.
13
Attach the other end of the cable to the PCIe adapter on your Host computer.
14
Power up the PXIe chassis. Verify that the chassis fans are operating and free
of obstructions that may restrict air flow.
15
Power up the Host PC.
If you are using a external PC, you must power up the chassis
BEFORE you power up the PC. When you power down your system,
shut down the PC BEFORE you power down the chassis.
If you are using an embedded controller in a multi-chassis
configuration, you must power up the target chassis BEFORE you
power up the chassis containing the embedded controller.