Keysight InfiniiVision M9241A Startup Manual Download Page 26

Page: 26 / 72

Keysight M9241/42/43A PXIe Oscilloscopes and M9240A AutoProbe Power Module Startup Guide

Install the Software

Chassis Requirements

Recommended best practices to ensure proper and safe module operating

conditions:
• Ensure proper chassis air flow is maintained.
• Select a chassis that provides thermal protection if fans become inoperable or

forced air cooling is obstructed

• Use slot blockers (Keysight model

Y1212A

, 5 per kit) and EMC filler panels in

empty module slots to ensure proper operating temperatures. Keysight chassis

Keysight M9018A chassis

and slot blockers optimize module temperature

performance and reliability of test.

• Set chassis fans to high or auto. Do not disable fans.
• Position chassis to allow plenty of space around chassis air intake and fan

exhaust.

• At environment temperatures above 45 °C, set chassis fan speed to high.

The M9018A has multiple air intakes. They are located at the lower sides, lower

front, and bottom of the chassis.

Embedded controller

Keysight

M9036A

M9307A

or an embedded controller that meets the following

requirements:

•

PXIe system controller (PXI-1 embedded controllers are not compatible).

•

Utilize a 2x8, or 4x4 PXIe system slot link configuration.

•

Run one of the operating systems listed in System Requirements (above).

Remote controller

(for Keysight M9018A chassis use only) A PC running one of the operating systems listed in

System Requirements above and a Keysight M9021A Cable Interface x8 with one of the

following PC interface options:

•

Keysight

M9045B

PCIe ExpressCard Adapter x1, with cable (for a laptop PC)

•

Keysight

M9048A

PCIe Desktop Adapter x8, with cable (for desktop PCs)

Item

Requirements

Figure 1

M9018A Chassis Air Flow

Summary of Contents for InfiniiVision M9241A









































































Search results

Summary of Contents for InfiniiVision M9241A

Reviews:

Related manuals for InfiniiVision M9241A

Brands by name

Popular brands

Keysight InfiniiVision M9241A, Startup Manual

Search results

Summary of Contents for InfiniiVision M9241A

Reviews:

Related manuals for InfiniiVision M9241A

Brands by name

Popular brands