manualshive.com logo in svg

Keysight InfiniiVision M9241A, Startup Manual

Share
Download
Keysight InfiniiVision M9241A Startup Manual Download Page 18

18

Keysight M9241/42/43A PXIe Oscilloscopes and M9240A AutoProbe Power Module Startup Guide

4

Install the Modules

 

5

Before inserting a module into the chassis, back the mounting screws out to 

ensure that there is no interference between the screws and the mounting rails.

6

Holding the module by the injector/ejector handle, slide it into an available PXI 

(or hybrid) slot, as shown in the following figure.

CAUTION

The M924xA PXIe oscilloscope can use peer-to-peer (module-to-module) triggering 

across the PXI Express chassis backplane. Therefore, be sure to install the M924xA 

modules into a chassis that supports peer-to-peer PXI Express I/O switch topology. 

When using the Keysight M9018A PXIe 18-Slot Chassis, install the M924xA modules 

into one of its three slot groups: 1 through 6, 7 through 12, or 13 through 18. For more 

information on coordinating multiple M924xA PXIe oscilloscope modules, see 

Chapter 8

, “Coordinating Multiple PXIe Oscilloscope Modules,” starting on page 45.

If you are using a non-Keysight chassis, consult your manufacturer's documentation.

NOTE

When using the Keysight M9018A Chassis you will achieve the highest data throughput for the 

Keysight M9241/42/43A PXIe oscilloscopes by using Slots 2, 6, 11 or 15. They are "x8" slots 

and the others are "x4". For further details see the 

Keysight M9018A Chassis 

documentation

. If you are using a non-Keysight chassis, consult your manufacturer's 

documentation.

Summary of Contents for InfiniiVision M9241A









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands