3
User Guide
42
Keysight E6953A V2X Test Solution Installation & User Guide
configurable. Both Direct and RFswitch losses can be configured for the same
"Port 1" to "Port 2" connectors but only the relevant setting will be applied,
depending on the presence of the RF switch i.e. if the RF switch is present then
the Direct connections will not be used.
Each connection point can be configured with multiple Frequency/Loss pairs as
follows:
Figure 3-13
Configure individual connection points
Depending on the "Port 1" selection, these compensations will be applied to the
VXT on a per port basis. This means that different compensation can be applied to
RFIn, RFOut and RFHD and these settings will only be applied when the port is
selected.
