Getting Started
1
Keysight 8990B Installation Guide
47
Once connection has been established, you can configure the 8990B LAN settings
remotely through SCPI (refer to the programming guide).
NOTE
– If the 8990B is not detected automatically on the Connection Expert, you can
manually insert a known IP address of the 8990B to detect it. To obtain this IP
address, go to the 8990B front panel display and select
Tools > Remote
Setup
. Then, on the Connection Expert, go to the Add Address page on the
Add LAN Instruments dialog and insert the IP address. You should now be
able to detect the 8990B and verify the connection.
– If you configure an invalid IP address or an IP address that is used by another
device or host, an error message is generated. This error can be read in the
Log view of the Multi-Purpose pane at the bottom of the display or by
sending the SYSTem:ERRor? query.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Installation Guide ...
Page 12: ...12 Keysight 8990B Installation Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 16: ...16 Keysight Product Model User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight Product Model User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...