manualshive.com logo in svg

Keysight 8990B, Installation Manual

Share
Download
Keysight 8990B Installation Manual Download Page 62

1

Getting Started

62

Keysight 8990B Installation Guide

Changing Windows System Settings

There are several Windows System settings that can be changed to suit your 

personal preferences. However, there are some System settings that you should 

avoid changing because it will interfere with the proper operation of the 8990B.
– Do not change the Power Options.
– Do not change the System Properties Hardware tab settings.
– Do not change the Regional and Language Options Advanced tab settings.
– Do not remove Fonts.
– For Display Properties:

– Do not change the screen resolution or the color quality from Highest 

 

(32 bit).

– Do not change the Font size to Extra Large.
– Do not use a Menu font size greater than 14 points.

– Do not use the Administrative Tools to enable or disable Internet Information 

Services (Web Server).

NOTE

Before changing any Windows System settings outside of the 8990B application, 

you should exit the 8990B application.

Summary of Contents for 8990B


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands