Keysight 1000 Series User Manual Download Page 79

Page: 79 / 156

Capturing Data

Keysight 1000 Series Oscilloscopes User’s Guide

To save a recording

In the Sequence menu (

[Acquire]

Sequence

Mode=Storage

), press

Save

If the External location has been selected, use the Disk Manager to name and

save the waveform recording file. See

“Using the Disk Manager"

on page 116.

To load a recording

In the Sequence menu (

[Acquire]

Sequence

Mode=Storage

), press

Load

If the External location has been selected, use the Disk Manager to select and

load the waveform recording file. See

“Using the Disk Manager"

on page 116.

To import/export recordings

Because you can only export and import waveform recordings from an external

drive, select the External location. See

“To select internal/external recording

storage location"

on page 78.

In the Sequence menu (

[Acquire]

Sequence

Mode=Storage

), press

Imp./Exp.

Use the Disk Manager to select the file and import or export the waveform

recording. See

“Using the Disk Manager"

on page 116.

Internal

Recordings are saved and loaded from oscilloscope internal

memory.

External

Recordings are saved, loaded, exported, and imported from an

external USB drive.

Summary of Contents for 1000 Series





























































































































































Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands

Keysight 1000 Series, User Manual

Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands