Keysight 1000 Series, User Manual

Page: 112 / 156

112 Keysight 1000 Series Oscilloscopes User’s Guide
5
Saving, Recalling, and Printing Data
Saving and Recalling Data
Using the oscilloscope’s [Save/Recall] key, you can save and recall oscilloscope
waveforms and setups, and you can save oscilloscope display screens and data.
When turning off the oscilloscope after saving or recalling data from an external
USB drive, allow at least five seconds for the data transfer to complete.
To save and recall waveforms
You can save/recall oscilloscope waveforms and setups to/from 10 internal,
nonvolatile memory locations in the oscilloscope.
You can also save/recall waveforms and setups to an external USB drive when it is
connected to a rectangular USB host port.
1 Press [Save/Recall] .
2 In the Storage menu, press Storage .
3 Continue pressing the Storage softkey or turn the entry knob to select
“Waveform”.
Figure 48 [Save/Recall] Key
Menu
Zoom
Cursors Measure Acquire Display Help
Utility
Print
Save
Recall
Default
Setup
Auto-
Scale
Run
Stop
Single
Push Push
Push
for Zoom to Zero
for 50%