Keysight 1000 Series User Manual Download Page 106

Page: 106 / 156

106

Keysight 1000 Series Oscilloscopes User’s Guide

Making Measurements

Counter (Frequency)

The 1000 Series oscilloscopes have an integrated 6-digit hardware frequency

counter.

The counter operates on the currently selected trigger source and can measure

frequencies from 5 Hz to the bandwidth of the oscilloscope.

The counter uses the trigger comparator to count the number of cycles within a

period of time (known as the gate time), so the trigger level must be set correctly.

The frequency counter is not available in the Alternate trigger mode.

To turn the hardware frequency counter on or off:

Press

[Measure]

In the Measure menu, press

Counter

to toggle the frequency counter display

“ON” or “OFF”.

Summary of Contents for 1000 Series





























































































































































Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands

Keysight 1000 Series, User Manual

Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands